View Full Version : saturday night bps meet?
grn95t/a
01-17-2010, 08:28 PM
anyone interested in getting together on a sat night at bps to show the local fbody force? any time i cruise thru there it's ricers and stangs.
383IROC
01-17-2010, 08:55 PM
Sorry, all I got running is a stang.
Red2001SS
01-17-2010, 10:12 PM
I'll start showing if people I know will be there.
grn95t/a
01-17-2010, 10:38 PM
Sorry, all I got running is a stang.
you can still hang with us man, after all it is a domestic
I'll start showing if people I know will be there.
i agree, i don't get many chances to drive mine and this would make the perfect excuse to get out with it.
I should finally have a legit inspection sticker next Saturday too so I'd be happy to finally come out...
grn95t/a
01-17-2010, 10:55 PM
I should finally have a legit inspection sticker next Saturday too so I'd be happy to finally come out...
excellent!
Red2001SS
01-17-2010, 10:58 PM
I still need to put my new UMI relocated Torque Arm with Driveshaft Safety Loop on. A lift would make life easier...... but would have to load the suspension to set the angle. Plus I'd like to change my rear springs first.
grn95t/a
01-17-2010, 11:03 PM
I still need to put my new UMI relocated Torque Arm with Driveshaft Safety Loop on. A lift would make life easier...... but would have to load the suspension to set the angle. Plus I'd like to change my rear springs first.
i know someone with a lift or two. and when he in stalled his, he just let the car down on 6x6's to set the angle.
Red2001SS
01-17-2010, 11:08 PM
I'll really need some help swapping the rear springs. But this TA should help my SS a bit. At least the BMR one on the SS will have a home on my Z28.
grn95t/a
01-17-2010, 11:15 PM
we'll just have to setup a sunday to meet up there.
Red2001SS
01-17-2010, 11:19 PM
I'm free still, anytime.
matrik
01-18-2010, 02:47 AM
Hell yeah I want to go to BPS, havn't been out to a local ricer meet in a long time! Its always a good time haha. I can't go out this upcoming saturday, but the next i'm free.
My 4mula
01-18-2010, 10:51 AM
Wow you're free on a weekend :p Well, umm we don't have anything really to cruise in with haha... and well were early birds, but I'll see if I can convince the other half to stay up past his bed time :rolling:
Tdevil55
01-18-2010, 11:54 AM
Just say when and Ill be there, its too close to me to say no.
Red2001SS
01-18-2010, 12:02 PM
BPS is best to show at 10pm on Sat.
novajoe
01-18-2010, 03:31 PM
If I get my plug wire replaced I will show.
Burned #8 the only one that is a *%^ to get too.
I also need to get my dang heat working. Seems like the vacuum door is jammed or something...
grn95t/a
01-18-2010, 06:26 PM
so two saturdays from today sound good for everyone?
11secss
01-18-2010, 06:39 PM
Geuss I need to make sure my car is cleaned up.....:thumbsup:
grn95t/a
01-18-2010, 06:40 PM
mine needs some soap on it bad too..
Biggriff
01-18-2010, 07:48 PM
Chris, i'll wash yours as long as we fix my TV...i'm in...
DomesticDisturbance
01-18-2010, 08:30 PM
i just washed mine tonight. this the first ive washed it in about a month and a half. im so glad it was decent today.
matrik
01-19-2010, 07:26 PM
so two saturdays from today sound good for everyone?
Sounds good to me! I did just realize that I'm hopefully going to richmond on that saturday morning to get the car tuned by Frost. Pending everything works out, I'll be there :thumbsup:
grn95t/a
01-19-2010, 09:01 PM
Chris, i'll wash yours as long as we fix my TV...i'm in...
fair trade i'd say! you gonna come to bps frank?
Sounds good to me! I did just realize that I'm hopefully going to richmond on that saturday morning to get the car tuned by Frost. Pending everything works out, I'll be there :thumbsup:
sweet seth! hope to see you there. seen you today about 2ish on hardy cash. sounded like you had the cutout open? :brows:
grn95t/a
01-19-2010, 09:20 PM
we going this sat or next to bps? or both?
383IROC
01-19-2010, 09:23 PM
I can't do this Sat, since I'm flying out at 5 Sunday. Yuk.
matrik
01-19-2010, 09:37 PM
sweet seth! hope to see you there. seen you today about 2ish on hardy cash. sounded like you had the cutout open? :brows:
Was on the way to work, thats like 1 minute from where I live. I cruise with it open when I don't have to leave for work at 5:30AM :THumbsdown:
grn95t/a
01-19-2010, 09:42 PM
Was on the way to work, thats like 1 minute from where I live. I cruise with it open when I don't have to leave for work at 5:30AM :THumbsdown:
sounds mean, heard you before i saw you. :thumbsup:
I can't do this Sat, since I'm flying out at 5 Sunday. Yuk.
yuk is right...
Tdevil55
01-19-2010, 09:49 PM
Yea, I may be out of commission this sat also, looking at trying to do the cam install if Tim gets an ok to do it.
DomesticDisturbance
01-19-2010, 09:49 PM
im not going to be able to make it this weekend myself but i will shoot for the following considering that what it looks like everyone is planning
Red2001SS
01-19-2010, 10:06 PM
Down for both, weather depending.
grn95t/a
01-22-2010, 10:11 PM
weather is looking clear, cold but clear. i'll be there around 10pm tomorrow.
Red2001SS
01-22-2010, 10:19 PM
Will be in the Z.
grn95t/a
01-22-2010, 10:44 PM
cool, see ya there..
matrik
01-23-2010, 07:32 AM
**** its tempting to stay up late and just go for a little while, I bet I'll be awake anyways...
Gotta get my inspection this morning and heat fixed this afternoon hopefully.
socalmach
01-23-2010, 09:07 AM
I'll wave from 64 as I'm heading back from D.C. tonight. It's gonna be freaking cold out there.
11secss
01-23-2010, 09:27 AM
I'll be up there tonight ....might as well clean the car a little since today is kinda nice outside
Bobrsss
01-23-2010, 09:42 AM
I'll wave from 64 as I'm heading back from D.C. tonight. It's gonna be freaking cold out there. Yeah, about 430 am.
Red2001SS
01-23-2010, 03:05 PM
It'll be chilly for sure, will still be there. Tomorrow is going to be a real nice day.
travisnd
01-23-2010, 04:30 PM
Have fun everyone and be safe!
Tdevil55
01-23-2010, 04:53 PM
anyone want to meet up a little early someplace to grab a bite to eat before we go to bps?
Red2001SS
01-23-2010, 05:28 PM
I'm eating in a few. Maybe?
Tdevil55
01-23-2010, 07:38 PM
Me and Rich will be meeting at hooters on merc around 830 for a few wings and whatnot if anyone else wants to meet there. Kinda want to get the cars together there and then ride in with a few cars, really make the ricers and whatnot look at us.
grn95t/a
01-23-2010, 07:38 PM
got mine all cleaned up, see you guys there...
Red2001SS
01-23-2010, 07:42 PM
Didn't clean mine at all, even has bird crap on it. Wish it wasn't such a big deal to discharge firearms in city limits, otherwise there'd be tons of dead seagulls.
grn95t/a
01-23-2010, 07:45 PM
Didn't clean mine at all, even has bird crap on it. Wish it wasn't such a big deal to discharge firearms in city limits, otherwise there'd be tons of dead seagulls.
a good ole 12 gauge and them seagulls would be gone SPKENNEY
Red2001SS
01-23-2010, 07:49 PM
I would have to resort to a harder way of that, no shotgun but I got a 9mm Beretta 92FS with a laser sight that I could knock a few off with. Better to use the 9 as opposed to my Kimber .45.
Bobrsss
01-23-2010, 08:19 PM
Buy a cover. It's cheaper than the ticket.
Red2001SS
01-23-2010, 08:24 PM
Have a cover, but then the cover gets all shi-tay.
But I won't be shooting them, it's why I said I wish it wasn't a big deal.
Bobrsss
01-23-2010, 08:25 PM
You're right. And they are a ***** to clean!
grn95t/a
01-23-2010, 08:26 PM
alka seltzer anyone?
Bobrsss
01-23-2010, 08:28 PM
You know we tried that and the MFers never ate them.
11secss
01-23-2010, 08:28 PM
paint some seagulls on the top of your car that way tha wont shat on it .Thats what they do on piers .
grn95t/a
01-23-2010, 08:39 PM
You know we tried that and the MFers never ate them.
well back to my first advice...SPKENNEY
paint some seagulls on the top of your car that way tha wont shat on it .Thats what they do on piers .
that would look sweet, lmao!
Red2001SS
01-23-2010, 08:47 PM
They don't sit on it, they circle around and bomb from above.
vBulletin® v3.8.0, Copyright ©2000-2012, Jelsoft Enterprises Ltd.